Important: The order that the transmitters are programmed is important, the first transmitter programmed will be transmitter #1, and the second transmitter programmed will be transmitter #2. You can program up to four transmitters. Additional transmitters are available that do not have a number on them. Any previously programmed transmitters which were not included in the programming will no longer function with this receiver. The number on the transmitters are for reference only, #2 can be programmed as #1 or vice versa. Use care to program the transmitters correctly.

1. Connect a scan tool.
2. Select diagnostics.
3. Select body code.
4. Select body style code.
5. Select other.
6. Select RFA.
7. Select special functions.
8. Select F0 program key fobs.
9. Choose the fob number that you wish to program.
10. Follow screen prompts to complete programming procedure.
11. Press and hold the lock and unlock buttons on the transmitter being programmed, the door locks will cycle. This should take about 15  seconds.
12. Continue on to the next transmitter and repeat until all of the transmitters are complete.
13. Exit the RKE programming and disconnect the scan tool.
14. Cycle the ignition and test the transmitters for proper operation.

The transmitters can be customized to have the following actions take place when a certain transmitter is used:

To program the personalization features use the following procedure:

1. Connect scan tool.
2. Select diagnostics.
3. Select body.
4. Select body code.
5. Select body style code.
6. Select other.
7. Select personalization.
8. Select driver information.
9. Choose driver.
10. Select driver number key fob options.
11. Change functions to active or inactive as desired.
12. Save options and exit system.