1. Remove the door trim panel. Refer to Door Trim Panel Replacement .
2. Remove the door module. Refer to Door Control Module Replacement .
3. Remove the ten retainers by depressing the center pins to release retainers.
4. Disengage the wiring harness grommet.
5. Pull the wiring harness through the hole in the water deflector.
6. Remove the water deflector.

Important: Reuse the ten retainers by pushing the center pin back through the retainer body.

1. Route the wiring harness through the hole in the water deflector.
2. Align the water deflector to the door assembly.
3. Install the retainers and lock them by pressing the center pin flush with the retainer body.
4. Seat the wiring harness grommet.
5. Install the door module. Refer to Door Control Module Replacement .
6. Install the door trim panel. Refer to Door Trim Panel Replacement .