Removal Procedure
- Unsnap and open the seat belt retractor cover.
- Remove the retaining clip securing the headrest to the retractor.
- Remove the headrest from the retractor.
- If a repair to the cover is being made, complete the following
steps:
| • | Dis-engage the J channel |
| • | Remove the cover and the pad from the support shaft |
| • | Repair the cover (as needed) |
Installation Procedure
- Position the pad and the cover to the support shaft.
- Engage the J channel.
- Install the headrest to the seat belt retractor.
- Install the retaining clip to the retractor to secure.
- Snap the seat belt retractor cover into place.
