Removal Procedure
- The AIR BAG Warning Indicator is not
serviceable separately. The Instrument Panel (IP) Cluster must be service
as a complete unit.
- Turn the ignition OFF.
- Remove the Instrument Panel (IP) cluster electrical connector (1)
from the IP cluster (2). Refer to
Instrument Cluster Replacement
in Instrument Panel, Guages and Console.
Installation Procedure
- Install the IP cluster electrical connector (1)
to the IP cluster (2). Refer to
Instrument Cluster Replacement
in Instrument Panel, Guages and Console.
- Turn ON the ignition, with the engine OFF. The AIR BAG Warning
Indicator should flash seven times then turn off.
- If the AIR BAG Warning Indicator stays illuminated after flashing
seven times perform the SIR diagnostic system check. Refer to
SIR Diagnostic System Check
.