Was the Wiper/Washer System Check performed?

--

Go to Step 2

Go to Wiper/Washer System Check or Wiper/Washer System Check

1. Turn the ignition switch to ON.
2. Set the wiper switch to LO.
3. Disconnect wiper motor harness connector.
4. Connect a test light from wiper motor connector (harness side) terminal G to ground.
5. Momentarily activate the washer switch while observing the test light.

Is the test light on when the washer switch is released?

--

Go to Step 3

Go to Step 4

Replace the wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement .

Is the replacement complete?

--

Go to Wiper/Washer System Check or Wiper/Washer System Check

--

Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement .

Is the replacement complete?

--

Go to Wiper/Washer System Check or Wiper/Washer System Check

--