Seat Horizontal and Vertical Drive Cable Replacement for Cadillac Seville 1999

1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
3. Remove the seat cushion frame. Refer to Front Seat Cushion Support Replacement .
4. If the cable is equipped with a position sensor, remove the sensor retention clip and disconnect the electrical connector.



5. Squeeze the collar of the cable in order to release the cable.



6. Pull the cable out of the fitting until the cable end clears the fitting.
7. Remove the cable or cable/sensor assembly.

1. Install the cable or cable/sensor assembly by pushing the ends into the fittings until the clip snaps into place.
2. If the cable is equipped with a position sensor, install the sensor retention clip and connect the electrical connector.
3. Install the seat cushion frame. Refer to Front Seat Cushion Support Replacement .
4. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .
5. Enable the SIR system. Refer to Enabling the SIR System in SIR.