Starter Replacement for Cadillac Seville 2000

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6 L.



3. Disconnect the wire from the "S" terminal on the starter.
4. Disconnect the battery cable from the starter.



5. Remove the two starter mounting bolts.
6. Remove the starter.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Connect the wire to the "S" terminal on the starter.

Tighten
Tighten the nut to 3 N·m  (27 lb in).

2. Connect the battery cable lead.

Tighten
Tighten the nut to 8 N·m  (71 lb in).




3. Install the starter motor.
4. Install the starter motor mounting bolts.

Tighten
Tighten the bolts to 30 N·m (22 lb ft).

5. Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.6 L.
6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .