Rear Seat Heater Switch Replacement for Cadillac Seville 2000

1. Remove the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement in Doors.



2. Disconnect the electrical connector (2) from the rear heated seat switch (3).
3. Remove the two heated seat switch fasteners (1).
4. Remove the rear heated seat switch (2) from the door panel.

1. Install the rear heated seat switch (2) to the door panel.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the two fasteners (1).

Tighten
Tighten the fasteners fully driven, seated, but not stripped.

3. Install the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement in Doors.