Tools Required

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the upper filler panel. Refer to Filler Panel Replacement - Upper in Body Front End.



3. Position the J 38185  (2) to the clamp in order to remove the inlet radiator hose (1) from the water housing crossover.



4. Position the J 37097-A to the clamp in order to remove the inlet radiator hose from the radiator.
5. Remove the inlet radiator hose from the vehicle.

1. Position the J 37097-A to the clamp in order to connect the inlet radiator hose to the radiator.



2. Position the J 38185  (2) to the clamp in order to connect the inlet radiator hose (1) to the water housing crossover.
3. Install the upper filler panel. Refer to Filler Panel Replacement - Upper in Body Front End.
4. Fill the cooling system. Refer to Cooling System Draining and Filling .