GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Seville 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Intermediate Cable Replacement

Parking Brake Intermediate Cable Replacement LHD

Tools Required

J 37043 Parking Brake Cable Release Tool

Removal Procedure

    Object Number: 492729 Size: SH
  1. Raise the vehicle and support. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
  3. Remove the intermediate park brake cable (2) from the park brake cable connector (1).

    4. Object Number: 106224 Size: SH
  4. Disconnect the intermediate park brake cable (3) from the rear equalizer (1).
  5. Disconnect the intermediate park brake cable (3) from the right rear park brake cable (5).
  6. Using J 37043 disconnect the intermediate park brake cable housing from the rear park brake cable housing support.
  7. Remove the intermediate park brake cable.

Installation Procedure

    Object Number: 106224 Size: SH
  1. Route and install the intermediate park brake cable into park brake cable connector.
  2. Install the intermediate park brake cable (3) to the equalizer (1).
  3. Connect the right rear park brake cable (5) to the intermediate park brake cable (3).

    4. Object Number: 492729 Size: SH
  4. Insert the intermediate park brake cable (2) into the park brake cable connector (1).
  5. Lower the vehicle.

Parking Brake Intermediate Cable Replacement RHD

Tools Required

J 37043 Parking Brake Cable Release Tool

Removal Procedure
  1. Raise the vehicle and support. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 106181 Size: SH
  2. Loosen the park brake cable from the adjuster.
  3. Remove the park brake cable from the adjuster.

    4. Object Number: 106224 Size: SH
  4. Disconnect the intermediate park brake cable (3) from the rear equalizer (1).
  5. Disconnect the intermediate park brake cable (3) from the right rear park brake cable (5).
  6. Using J 37043 disconnect the intermediate park brake cable housing from the rear park brake cable housing support.
  7. Remove the intermediate park brake cable.

Installation Procedure

    Object Number: 106224 Size: SH
  1. Route and install the intermediate park brake cable into park brake cable connector.
  2. Install the intermediate park brake cable (3) to the equalizer (1).
  3. Connect the right rear park brake cable (5) to the intermediate park brake cable (3).

    4. Object Number: 106181 Size: SH
  4. Install the intermediate park brake cable to the adjuster.
  5. Adjust the park brake cable. Refer to Park Brake Adjustment .
  6. Lower the vehicle.