Test Description
The numbers below refer to the step numbers on the diagnostic table.
-
This step tests the integrity of the heated seat switch. In order for this step to be a valid test, the procedures within this step must be followed as instructed.
-
This step tests the integrity of the heated seat switch signal circuit between the heated seat switch and the rear door module. In order for this step to be a valid test, the procedures within this step must be followed as instructed.
-
This step tests the integrity of the rear integration module. In order for this step to be a valid test, the procedures within this step must be followed as instructed.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Heated Seats Schematics Connector End View Reference: Power Seat Connector End Views or Power Door Systems Connector End Views in Doors | |||
1 | Did you review the heated seat operation and perform the necessary inspection? | Go to Step 2 | Go to Symptoms - Seats |
2 | Verify that the Heated Seat Always On complaint is present. Does the heated seat system operate as described in the system description and operation? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
Does the seat cool down? | Go to Step 8 | Go to Step 4 | |
Does the seat cool down? | Go to Step 6 | Go to Step 5 | |
Does the seat cool down? | Go to Step 10 | Go to Step 7 | |
6 | Test the rear heated seat switch signal circuit between the heated seat switch and the door module for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 15 | Go to Step 9 |
7 | Inspect for poor connections at the harness connector of the heated seat module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 15 | Go to Step 11 |
8 | Inspect for poor connections at the harness connector of the heated seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 15 | Go to Step 12 |
9 | Inspect for poor connections at the harness connector of the rear door module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 15 | Go to Step 13 |
10 | Inspect for poor connections at the harness connector of the rear integration module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 15 | Go to Step 14 |
11 | Replace the rear heated seat module. Refer to Rear Seat Heater Control Module Replacement . Did you complete replacement? | Go to Step 15 | -- |
12 | Replace the rear heated seat switch. Refer to Rear Seat Heater Switch Replacement . Did you complete the replacement? | Go to Step 15 | -- |
13 | Replace the rear door module. Refer to Door Control Module Replacement in Doors. Did you complete the replacement? | Go to Step 15 | -- |
14 | Replace the rear integration module. Refer to Rear Integration Body Control Module Replacement in Body Control System. Did you complete the replacement? | Go to Step 15 | -- |
15 | Operate the system in order to verify the repair Did you correct the condition? | System OK | Go to Step 2 |
