Removal Procedure
- Remove the door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the door module. Refer to
Door Control Module Replacement
.
- Remove the ten retainers
by depressing the center pins in order to release the retainers.
- Disengage the wiring harness grommet.
- Pull the wiring harness through the hole in the water deflector.
- Remove the water deflector.
Installation Procedure
Important: Reuse the retainers by pushing the center pin back through the retainer
body.
- Route the wiring harness
through the hole in the water deflector.
- Align the water deflector to the door assembly.
- Install the retainers.
Lock the retainers by pressing the center pin flush with the retainer
body.
- Seat the wiring harness grommet.
- Install the door module. Refer to
Door Control Module Replacement
.
- Install the door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.