GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Seville 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Opening Frame Garnish Molding Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .

    2. Object Number: 105396 Size: SH
  2. Disconnect the electrical connector.
  3. Remove the wiring harness from the retaining clip.
  4. Remove the door frame garnish molding (1) by pulling the molding away from the door window opening flange.

Installation Procedure

    Object Number: 105396 Size: SH

    Important: Reinstall any clips that were pulled off the garnish molding (1), and replace any broken clips if the garnish molding is going to be reused.

  1. Install the door frame garnish molding (1) to the window opening.
  2. Engage the clips to the door inner panel flange.
  3. Install the two push pins into the locator holes in the door panel at each end of the garnish molding.
  4. Secure the wiring harness into the retaining clip.
  5. Connect the electrical connector.
  6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .