For 1990-2009 cars only
Removal Procedure
- Remove the carpet retainer. Refer to Rear Carpet Retainer Replacement in Interior Trim.
- Start at the joint at bottom of door opening and pull the weatherstrip away from the pinch weld flange.
- Work around the door opening and remove the weatherstrip.
Installation Procedure
- Position the paint dot in the upper corner of the center pillar.
- Working downward along the front edge, install the weatherstrip on the pinch weld flange, making sure that the carrier is fully seated in the corners.
- From the center pillar corner working rearward, install the weatherstrip along the roof rail and the body lock pillar flange, making sure that the carrier is fully seated in the corners.
- Using a rubber mallet, ensure that the weatherstrip is seated on the entire door opening flange.
- Using a plastic trim stick or equivalent, position the closeout lip over the interior trim around the door opening, or use the pull-string under the closeout lip of the new weatherstrip.
- Install the carpet retainer. Refer to Rear Carpet Retainer Replacement in Interior Trim.
Important: One paint dot on the weatherstrip indicates RH weatherstrip starting point, and two paint dots on the weatherstrip indicates LH weatherstrip starting point.
