GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Seville 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Switch Replacement

Removal Procedure

    Object Number: 291886 Size: SH
  1. Insert a flat bladed tool under the rear edge of the rear window switch plate.
  2. Push the tool firmly towards the switch plate in order to disengage the retainer.

    3. Notice: The retainer clip must be fully disengaged before the switch plate is removed. Otherwise, damage to the switch plate could result.

  3. Lift up on the rear of the switch plate in order to remove it from the door trim panel.

    4. Object Number: 291887 Size: SH
  4. Disconnect the electrical connectors.
  5. Remove the switch plate assembly.
  6. Remove the switch from the switch plate by disengaging the side snap walls with small flat bladed tool.

Installation Procedure
  1. Snap the switch into the switch plate.

    2. Object Number: 291887 Size: SH
  2. Connect the electrical connectors.
  3. Install the switch plate into the door trim panel.
  4. Engage the front of the switch plate to the door panel.
  5. Press down on the switch plate evenly in order to engage the retainer clips.