GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Seville 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Inside Handle Replacement

Removal Procedure

    Object Number: 288916 Size: SH
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the four nuts from the inside door handle.
  3. Remove two fasteners from inside door handle.
  4. Remove the inside door handle.

Installation Procedure

    Object Number: 105456 Size: SH
  1. Install the inside door handle into the opening in the trim panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the four inside door handle nuts on the trim panel studs.

    3. Tighten
    Tighten the nuts to 3 N·m (27 lb in).

  3. Install the two fasteners in the door handle.
  4. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .