GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Seville 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Lower Fascia Grille Replacement

Removal Procedure

    Object Number: 130554 Size: SH
  1. Remove the screws (3) securing the top surface of the front bumper fascia lower grille (2) to the front bumper fascia (1).

    2. Object Number: 130556 Size: SH
  2. Pull the top of the front bumper fascia lower grille (2) outward and down to access the lower fasteners (3).
  3. Remove the screws.

    4. Object Number: 130559 Size: SH
  4. Remove the front bumper fascia lower grille (2) from the front bumper fascia (1).

Installation Procedure

    Object Number: 130559 Size: SH
  1. Position the front bumper fascia lower grille (2) to the front bumper fascia (1).

    2. Object Number: 130556 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (3) in order to secure the front bumper fascia lower grille (2) to the front fascia (1).

    3. Tighten
    Tighten the screws to 7 N·m (62 lb in).


    Object Number: 130554 Size: SH
  3. Install the screws (3) in order to secure the top surface of the front bumper fascia lower grille (2) to the front bumper fascia (1).

    4. Tighten
    Tighten the screws to 7 N·m (62 lb in).