For 1990-2009 cars only
Removal Procedure
- Starting at the rear of the door, use a flat-bladed tool to gently pry the door lower molding from the door. Use care not to damage the paint.
- Remove the door lower molding from the door.
- Clean the old adhesive from the door and the door lower molding (if reusing) with 3M General Purpose Adhesive Cleaner 08984 or equivalent.
Installation Procedure
- If the molding is being reused, apply new adhesive tape to the molding.
- Align the door lower molding using the wall at the rear of the door lower molding.
- Remove the backing from the tape.
- Align and press the door lower molding to the door. Assure proper wetout of the adhesive by applying heavy hand pressure against the ends of the molding.
Important: Wear clean gloves or use a clean towel while performing this step.
