Removal Procedure
- Remove the left rear sail panel. Refer
to
Sail Panel Replacement
in Interior Trim.
- Remove the rear assist handles. Refer to
Assist Handle Replacement
in Interior Trim.
- Disconnect the electrical connectors from the radio antenna module.
- Remove the fastener retaining the radio antenna module to the
roof beam.
- Remove the radio antenna module.
Installation Procedure
- Install the radio antenna module to
the roof beam, ensuring that the alignment tab is properly located.
Notice: Refer to Fastener Notice in the Preface section.
- Install radio module retaining fastener.
Tighten
Tighten the fastener to 9 N·m (80 lb in).
- Connect the electrical connectors to the radio antenna module.
- Install the rear assist handles. Refer to
Assist Handle Replacement
in Interior Trim.
- Install the left rear sail panel. Refer to
Sail Panel Replacement
in Interior Trim.