Headlamp Switch Replacement LHD

The headlamp, foglamp switch assembly uses skin locks which grab the soft skin material of the IP. The skin lock feature may cause the switch to be hard to remove.

1. Remove left IP end cap. Refer to Instrument Panel Outer Trim Cover Replacement in Instrument Panel, Gages and Console.



2. Push on rear side of headlamp, fog lamp switch assembly.



3. Disconnect the electrical connectors.
4. Remove the headlamp switch.

1. Connect electrical connectors.
2. Align headlamp, fog lamp switch assembly with opening in IP and push into position until flush with IP surface.
3. Install left IP end cap. Refer to Instrument Panel Outer Trim Cover Replacement in Instrument Panel, Gages and Console.