Subject: | Exhange Program-Parts Restriction Program for Magnetic Ride Control Suspension System Components |
Models: | 2002 Cadillac Seville STS with RPO F55 |
Built After VIN Breakpoint 2U217411 |
Attention: | Parts Department, Service Department, Warranty Department |
This bulletin is being revised to add additional part numbers. Please discard Corporate Bulletin Number 02-03-11-001 (Section 03 -- Suspension).
Important: "IPC" dealers are not authorized to utilize this Service Bulletin.
Beginning January 15, 2002, the 2002 Cadillac Seville STS will be equipped with a new suspension system. The new system is called Magnetic Ride Control. The RPO code is F55 and will replace RPO code F45, the Continuously Variable Road Sensing Suspension System (CVRSS/CVRTD).
The new system incorporates Delphi®'s MagneRide technology and may be referred to as:
• | MRRTD - MagneRide Real Time Dampening |
• | MRCVRTD - Magneto Rheological Continuously Variable Real Time Dampening |
• | MRCVRSS - Magneto Rheological Continuously Variable Road Sensing Suspension |
For proper diagnostic and repair procedures, refer to the 2002 Cadillac Seville Service Information (SI).
In order to provide feedback and increased customer satisfaction, a parts restriction program will be in effect from February 2002 through February 2003 on the following components:
Part Number | Description |
---|---|
22400277 | Absorber Asm, RR Leveling Shock - LH |
22400278 | Absorber Asm, RR Leveling Shock - RH |
22400279 | Absorber Kit, RR Leveling Shock |
25720987 | Module Asm, Electronic Suspension Control |
88955399 | Strut Asm, Front Suspension |
Important: If any of the restricted parts listed above are ordered directly from GMSPO, the order will be rejected with a message to contact TAC.
• | Dealer Code |
• | Vehicle Identification Number (VIN) |
• | Mileage |
• | Repair Order Number |
• | Results of Diagnosis |
• | Dealer Code |
• | Vehicle Identification Number (VIN) |
• | Mileage |
• | Repair Order Number |
• | Results of Diagnosis |
The parts may be requested for return by the Warranty Parts Center (WPC) in accordance with Corporate Bulletin Number 99-00-89-019B, dated January 2002 (Canadian Dealers should refer to Home Office Letter (HOL)1999-201, dated January 5, 1999 for all WPC returns).
DO NOT RETURN PARTS WITHOUT WPC REQUESTED PAPERWORK.
Dealers are encouraged to process their warranty claims as quickly as possible in order to expedite the part return request from the WPC. Dealers will receive a WPC request via DCS when the claim is paid.
You must follow these guidelines when returning a part:
• | Package the part in the replacement GMSPO part container, along with a copy of the WPC request and repair order. |
• | Return the part immediately upon receipt of the WPC return request, using the WPC pre-printed UPS/ARS labels previously provided. |
• | Do not include other unrelated parts with this shipment to the WPC. |