Removal Procedure
- Remove the screw securing
the resonator to the powertrain control module (PCM) housing.
- Disengage the air cleaner cover latches.
- Gently pull upward to remove the air resonator (3) and
element cover from the air cleaner housing.
- Disconnect the mass air flow/intake air temperature (MAF/IAT)
sensor electrical connector (1).
- Remove the air cleaner element.
- Remove any loose debris that may be found laying in the base of
the air cleaner.
Installation Procedure
- Install the new air filter
element.
- Reconnect the MAF/IAT sensor electrical connector (1).
- Install the air resonator (3) and element cover to the
air cleaner housing.
- Snap both latches into place.
- Install the screw securing the air resonator to the PCM housing.