GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 105522  Size: SH
  1. Remove the IP end cap (1). Refer to Instrument Panel Outer Trim Cover Replacement in Instrument Panel, Gages and Console.
  2. Grasp the side air outlet (2) and pull the outlet outward in order to remove the outlet.

Installation Procedure


    Object Number: 105522  Size: SH
  1. Align the side air outlet (2).
  2. Push the side air outlet (2) on the cross car duct until the outlet is fully seated.
  3. Install the end cap (1). Refer to Instrument Panel Outer Trim Cover Replacement in Instrument Panel, Gages and Console.