DEFINITION: Noise originating from the A/C compressor, drive belt or the A/C lines.

Were you sent here from Symptoms or another diagnostic table?

Go to Step 2

Go to Diagnostic System Check - HVAC Systems - Automatic

1. A/C system noises can be generally categorized into three areas:

•	Screeching, Squealing, Chirping noises

•	Moaning noises

•	Vibration/Rattle noises

2. Start the engine.
3. Ensure that the A/C is ON.

Do you hear a screeching, squealing noise when you engage the A/C?

Go to Step 3

Go to Step 9

With the engine OFF, inspect the drive belt for excessive wear. Refer to Drive Belt Excessive Wear Diagnosis in Engine Mechanical -- 4.6L.

Is the drive belt excessively worn?

Go to Step 18

Go to Step 4

Inspect the drive belt tension. Refer to Drive Belt Tensioner Diagnosis in Engine Mechanical - 4.6L.

Is the drive belt tension correct?

Go to Step 5

Go to Step 19

Inspect the drive belt for excessive oil coverage.

Is the drive belt covered with oil?

Go to Step 17

Go to Step 6

1. Start the engine.
2. Ensure that the A/C is ON.
3. Inspect the compressor and the clutch.

Is the A/C compressor locked up?

Go to Step 23

Go to Step 7

Is the A/C compressor clutch slipping?

Go to Step 23

Go to Step 8

Caution: Refer to Moving Parts and Hot Surfaces Caution in the Preface section.

Using a stethoscope, listen to the A/C compressor for any abnormal noises.

Is the compressor causing an abnormal noise?

Go to Step 15

Go to Step 10

Does a moaning noise exist when the A/C clutch is engaged?

Go to Step 10

Go to Step 12

Listen to the A/C compressor components and mounting for noise concerns using a stethoscope.

Are any of these components loose, damaged or excessively worn?

Go to Step 20

Go to Step 11

1. Start the engine.
2. Engage the A/C compressor clutch.
3. Using a stethoscope, move around the entire refrigerant plumbing system. Listening for any abnormal noises caused by a component of the A/C system touching another component.

Are any of the A/C components grounding out and causing a vibration noise?

Go to Step 22

Go to Step 13

Does a vibration or rattle noise exist when the A/C clutch is engaged?

Go to Step 13

Go to Step 14

Does the noise stop when the A/C clutch is disengaged?

Go to Step 15

Go to Step 24

1. Idle the engine in PARK with the A/C compressor clutch engaged.
2. Using a stethoscope, move around the entire A/C system listening for any abnormal noises caused by a component.

Do any of the A/C components cause an abnormal noise?

Go to Step 21

Go to Step 24

Verify that the A/C system is properly charged. Refer to Refrigerant System Capacities .

Is the A/C system properly charged?

Go to Step 24

Go to Step 16

Recharge the A/C system to specification. Refer to Refrigerant Recovery and Recharging .

Is the abnormal compressor noise still present?

Go to Step 23

Go to Step 25

Repair the oil leak. Refer to the appropriate repair procedure in Engine Mechanical - 4.6L.

Is the repair complete?

Go to Step 25

--

Replace the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.6L.

Is the replacement complete?

Go to Step 25

--

Replace the drive belt tensioner. Refer to Drive Belt Tensioner Replacement in Engine Mechanical - 4.6L.

Is the replacement complete?

Go to Step 25

--

Repair or replace the A/C compressor mounting component.

Is the repair complete?

Go to Step 25

--

Repair or replace the component which is causing the moaning concern as needed.

Is the repair complete?

Go to Step 25

--

Correctly route or insulate the A/C component.

Is the repair complete?

Go to Step 25

--

Replace the A/C compressor. Refer to Air Conditioning Compressor Replacement .

Is the replacement complete?

Go to Step 25

--

The concern may be caused by an engine related component. Refer to Vibration Analysis - Engine in Vibration Diagnosis and Correction.

Did you find and correct the condition?

Go to Step 25

--

Operate the system in order to verify the repair.

Did you find and correct the condition?

System OK

Go to Step 2