1. Remove the rear shelf panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.



2. Remove the fastener (1) that retains the child tether anchor (2) that is being serviced.
3. Remove the child tether anchor (2) from the vehicle.

Important: During installation ensure that the child tether anchor (1) is installed with the anti rotation tabs firmly seated in the anti rotation holes on the cross car beam. The anti rotation tabs face forward on both the left and the right sides. For the center child tether anchor (1), the anti rotation tabs face the rear of the vehicle

1. Install the child tether anchor (1) to the cross car beam.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the child tether anchor fastener (2).

Tighten
Tighten the fastener to 30 N·m (22 lb ft).

3. Install the rear shelf panel reinforcement. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.