Removal Procedure
- Using a small-bladed tool,
release the lower tab from the rear quarter courtesy lamp bezel.
- Remove the rear quarter courtesy lamp bezel in order to gain access
to the bulb.
- Remove the bulb for replacement.
- Remove the rear quarter courtesy lamp bezel by pulling the wiring
harness out from behind the headliner enough to disconnect the electrical
connector.
- Partially lower the headliner
in order to gain access to the rear quarter courtesy lamp body. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Careful pry the rear quarter courtesy lamp body away from the
roof rail pocket with a flat-bladed tool.
- Release the 2 retainer clips.
- Pull the rear quarter courtesy lamp body out far enough in order
to disconnect the electrical connector.
- Remove the rear quarter courtesy lamp body.
Installation Procedure
- Connect the electrical
connector.
- Install the rear quarter courtesy lamp body into the roof rail
pocket.
- Push inward in order to engage the retainers.
- Install headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Connect the rear quarter courtesy lamp switch electrical connector.
- Install the rear quarter courtesy lamp bezel.
- Install the bottom tab of the rear quarter courtesy lamp bezel
first.
- Engage the top of the rear quarter courtesy lamp bezel.