GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 Seville 🢒 Body and Accessories 🢒 Entertainment 🢒 Steering Column Control Module Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.


    Object Number: 312291 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  3. Disconnect the electrical connectors (2) on the steering column control module.

    4. Object Number: 312298 Size: SH
  4. Remove the control module (2) from the wire harness shield (1) of the lower steering column by pulling the module outward to release the retaining clips and sliding the module downward.

Installation Procedure

    Object Number: 312298 Size: SH
  1. Install the control module (2) to the wire harness shield (1) of the lower steering column.

    2. Object Number: 312291 Size: SH
  2. Connect the control module electrical connectors (2).
  3. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  4. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  5. Program the steering column control module. Refer to Steering Column Control Module Programming .