Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
Theft Lighting | Outputs | On/Off | Off |
Hood Jamb Switch | Inputs | On/Off | Off |
Horn Output (Except SWC) | Outputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF , All Doors Closed | |||
Driver Door Cyl. Sw. | Inputs | Idle/Unlock | Inactive |
Driver Dome/Buzzer Sw. | Inputs | ON/OFF | OFF |
Pass. Dome/Buzzer Sw. | Inputs | ON/OFF | OFF |
LR Dome/Buzzer Sw. | Inputs | ON/OFF | OFF |
RR Dome/Buzzer Sw. | Inputs | ON/OFF | OFF |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
PCM / VCM in VTD Fail Enable | Engine Data 3 | Yes/No | No |
VTD Auto. Learn Timer | Engine Data 3 | Active/Inactive | Inactive |
VTD Fuel Disable | Engine Data 3 | Active/Inactive | Inactive |
VTD Password | Engine Data 3 | OK/Incorrect | OK |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
|
Important: Theft information will NOT change state unless the Content Theft Deterrent (CTD) system is in the ARMED mode. Operating Conditions: Ignition ON, Engine OFF | |||
Battery Reconnect | Theft Information | On/Off | Off |
CTD State | Theft Information | Ignition ignition & Door/Ignition & Locked/Standby/Open/Locked/Arm Pending/Armed/Warn Away/Alarm | Ignition On |
Driver Door Jamb Sw. | Theft Information | On/Off | Off |
Hood Ajar | Theft Information | Active/Inactive | Inactive |
Left Rear Door Jamb Sw. | Theft Information | On/Off | Off |
Pass. Door Jamb Sw. | Theft Information | On/Off | Off |
Power Mode Change | Theft Information | On/Off | Off |
Rt. Rear Door Jamb Sw. | Theft Information | On/Off | Off |
Trunk Disarm Switch | Inputs | OK/Disarm | OK |
Trunk Ajar Switch | Theft Information | On/Off | Off |
Trunk Ajar Switch | Inputs | Ajar/Closed | Closed |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
8-Digit GM Part Number | Module Information | Numeric | Varies |
Auto Learn Timer | Data | Minutes | 10:00 min |
Calibration ID | Module Information | Numeric | Varies |
Ignition Counter | Data | Counts | Varies |
Julian Date of Build | Module Information | Numeric | Varies |
Manufacturers Enabled Counter | Data | Counts | Varies |
No. of Learned Key Codes | Data | 1-10 | 4 |
Prom ID | Module Information | Numeric | Varies |
Security Lamp Status | Inputs | On/Off/Flash | Off |
Seed And Key Timer | Data | Seconds | 610 Seconds |
VTD Status | Inputs | Ignition Off/Monitor Key/Learn More Keys | Monitor Key |
Year Module Built | Module Information | year | Varies |
