Important: This vehicle is equipped with express up, torque sensitive window on the front door windows.

When the battery or the power has been removed from the front door module, the front door module will need to be reprogrammed after power is restored and all repairs are completed.
1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
2. Remove the drivers door module. Refer to Door Control Module Replacement .



3. Remove the nine retainers by depressing the center pins in order to release the retainers.
4. Disengage the wiring harness grommet.
5. Pull the wiring harness through the hole in the water deflector.
6. Remove the water deflector.

Important: Reuse the retainers by pushing the center pin back through the retainer body.

1. Route the wiring harness through the hole in the water deflector.
2. Align the water deflector to the door assembly.
3. Install the retainers.

Lock the retainers by pressing the center pin flush with the retainer body.

4. Seat the wiring harness grommet.
5. Install the drivers door module. Refer to Door Control Module Replacement .
6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
7. Reprogram the front door module. Refer to Window Motor Programming - Express Function .