GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 Seville 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Belt Retractor Replacement

Removal Procedure

    Object Number: 106144 Size: SH
  1. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
  2. Remove the head restraint.
  3. Remove the rear seat shoulder belt anchor bolt.

    4. Object Number: 106143 Size: SH
  4. Separate the front trim cover from the rear seat shoulder belt retractor.
  5. Remove the lower retractor nut.

    6. Object Number: 106142 Size: SH
  6. Remove the retractor through bolt.
  7. Remove the rear seat shoulder belt and retractor.

Installation Procedure

    Object Number: 106142 Size: SH
  1. Install the rear seat shoulder belt retractor tabs into the notches on the hinge box reinforcement ears.
  2. Rotate the rear seat shoulder belt retractor over the stud.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear seat shoulder belt retractor through bolt.

    4. Tighten
    Tighten the rear seat shoulder belt retractor through bolt to 30 N·m (22 lb ft).


    Object Number: 106143 Size: SH
  4. Install the rear seat shoulder belt retractor nut.

    5. Tighten
    Tighten the rear seat shoulder belt retractor nut to 30 N·m (22 lb ft).

  5. Install the front trim cover.

    6. Object Number: 106144 Size: SH
  6. Verify that the belt is not twisted.
  7. With the anchor plate facing forward, align the anchor plate between the dimples in the floor pan.
  8. Install the anchor bolt.

    9. Tighten
    Tighten the rear seat outer lower bolt to 41 N·m (32 lb ft).

  9. Install the rear head restraint.
  10. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.