GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 Seville 🢒 Body and Accessories 🢒 Seats 🢒 Driver or Passenger Seat Head Restraint Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Remove seat back trim cover. Refer to Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement .
  2. Remove seat belt post rear cover.

    3. Object Number: 295124 Size: SH
  3. Remove upper front seat belt post cover.
  4. Remove head restraint from support shaft.
    5. • Insert a small flat-bladed tool in the top and bottom of the support shaft opening.
    • Push in on the flat-bladed tool to release the head restraint retaining clips.
    • Pull the head restraint from the support shaft.

Installation Procedure
  1. Install the head restraint onto the shaft. Apply pressure until the clips engage.

    2. Object Number: 295124 Size: SH
  2. Install upper front seat belt post cover.
  3. Install rear seat belt post cover.
  4. Install seat back trim cover. Refer to Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement .