Removal Procedure
- Unsnap and open the rear
seat belt retractor cover (1).
- Remove the retaining clip (1)
securing the head restraint (2) to the retractor.
- Remove the head restraint
from the retractor.
- If a repair to the head restraint cover is being made, complete
the following steps:
| • | Dis-engage the head restraint cover J channel |
| • | Remove the head restraint cover and the pad from the support shaft |
Installation Procedure
- Position the head restraint
pad and the cover to the support shaft.
- Engage the head restraint cover J channel.
- Install the head restraint to the seat belt retractor.
- Install the retaining
clip (1) to the head restraint shaft in order to secure the head restraint (2).
- Install the rear seat
belt retractor trim cover (1).
