GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement in Doors.

  2. Object Number: 609858  Size: SH
  3. Disconnect the electrical connector (2) from the rear heated seat switch (3).
  4. Remove the two heated seat switch fasteners (1).
  5. Remove the rear heated seat switch (2) from the door panel.

Installation Procedure


    Object Number: 609858  Size: SH
  1. Install the rear heated seat switch (2) to the door panel.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the two fasteners (1).
  4. Tighten
    Tighten the fasteners fully driven, seated, but not stripped.

  5. Install the rear inside door handle. Refer to Rear Side Door Inside Handle Replacement in Doors.