GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 Seville 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Recliner Position Sensor Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling or SIR Disabling and Enabling in SIR.
  2. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  3. Remove the seat back trim cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .

    4. Object Number: 295189 Size: SH
  4. Remove retainer clip from the recliner motor end of the recliner shaft.

    5. Object Number: 295194 Size: SH
  5. Slide the recliner shaft out of recliner motor sensor (outboard side) far enough to clear sensor.
  6. Disconnect sensor electrical connector from beneath the seat .
  7. Release the recliner sensor from the recliner motor.

Installation Procedure
  1. Install the recliner sensor to the recliner motor.

    2. The recliner sensor snaps onto the recliner motor.


    Object Number: 295194 Size: SH
  2. Slide recliner shaft back through the recliner sensor and recliner motor.

    3. Object Number: 295189 Size: SH
  3. Install the retaining clip to the recliner shaft.
  4. Connect the recliner motor electrical connector.
  5. Install the seat back trim cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  6. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling or SIR Disabling and Enabling in SIR.