Scan Tool Output Controls. Cadillac Seville 2003

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2003 🢒 Seville 🢒 Body and Accessories 🢒 Seats 🢒 Scan Tool Output Controls

Table 1:	Memory Seat Module (MSM)
Table 2:	Rear Integration Module (RIM)

Memory Seat Module (MSM)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Rear Up/Down	--	The MSM activates the seat rear vertical motor when you select Up or Down. The motor should tilt the rear of the seat in the up or down direction until it reaches it's end of travel.
Front Up/Down	--	The MSM activates the seat front vertical motor when you select Up or Down. The motor should tilt the front of the seat in the up or down direction until the it reaches it's end of travel.
Lumbar Up/Down	--	The MSM activates the lumbar vertical motor when you select Up or Down. The motor should move the lumbar in the up or down direction until the it reaches it's end of travel.
Lumbar Forward/Rearward	--	The MSM activates the lumbar horizontal motor when you select Forward or Rearward. The motor should move the lumbar in the forward or rearward direction until the it reaches it's end of travel.
Seat Forward/Rearward	--	The MSM activates the seat horizontal motor when you select Forward or Rearward. The motor should move the entire seat in the forward or rearward direction until the it reaches it's end of travel.
Recline Forward/Rearward	--	The MSM activates the recline motor when you select Forward or Rearward. The motor should recline the seat back cushion in the forward or rearward direction until it reaches it's end of travel.
Belt Tower and Headrest Up/Down	--	The MSM activates the belt tower or headrest motor when you select Up or Down. The motor should move the belt tower or headrest in the up or down direction until it reaches it's end of travel.
Exit 1	--	The MSM activates the previously programmed seat directional motors when you select On. The motors should move the seat to the exit position for driver 1 or until you select Off.
Exit 2	--	The MSM activates the previously programmed seat directional motors when you select On. The motors should move the seat to the exit position for driver 2 or until you select Off.
Memory 1	--	The MSM activates the previously programmed seat directional motors when you select On. The motors should move the seat to the memory position for driver 1 or until you select Off.
Memory 2	--	The MSM activates the previously programmed seat directional motors when you select On. The motors should move the seat to the memory position for driver 2 or until you select Off.

Rear Integration Module (RIM)

Scan Tool Output Control	Additional Menu Selection(s)	Description
Heated Seats Inhibit	Heated Seat	The RIM signals the heated seat control modules to deactivate the heated seats when you select Heated Seat Inhibit. The heated seat modules should deactivate the heated seats.
Driver Rear Heated Seat Low	Heated Seat	The RIM commands the heated seat module to activate the heated seat to low heat when you select Driver Heated Seat Low. The heated seat module should enable the heated seat to low heat.
Driver Rear Heated Seat High	Heated Seat	The RIM commands the heated seat module to activate the heated seat to high heat when you select Driver Heated Seat High. The heated seat module should enable the heated seat to high heat.
Pass. Rear Heated Seat Low	Heated Seat	The RIM commands the heated seat module to activate the heated seat to low heat when you select Passenger Heated Seat Low. The heated seat module should enable the heated seat to low heat.
Pass. Rear Heated Seat High	Heated Seat	The RIM commands the heated seat module to activate the heated seat to high heat when you select Passenger Heated Seat High. The heated seat module should enable the heated seat to high heat.