- Loosen the jam nuts (1) on the tie rod.
- Rotate the inner tie rod to the required toe specification setting.
- Tighten the jam nuts on the tie rods.
- Recheck the toe settings after tightening the jam nuts.
- Readjust the toe setting if necessary.
Notice: Care must be taken so that the boots are not twisted when rotating the inner tie rod, or damage to the boots may result.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the jam nuts to 64 N·m (47 lb ft).
