Radio Speaker Amplifier Replacement UX9

1. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.



2. Remove the radio amplifier connectors from the radio amplifier.
3. Remove the fasteners retaining the radio amplifier.
4. Remove the radio amplifier from the vehicle.

1. Install the radio amplifier to the vehicle.
2. Install the radio amplifier connectors to the radio amplifier.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the radio amplifier fasteners.

Tighten
Tighten the fasteners to 9 N·m (80 lb in).

4. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.

Radio Speaker Amplifier Replacement w/o UX9

1. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
2. Remove the radio amplifier connectors from the radio amplifier.
3. Remove the fasteners retaining the radio amplifier.



4. Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
5. Remove the bay board fasteners (2).
6. Remove the bay board (1) in order to allow the necessary clearance to remove the radio amplifier.
7. Remove the radio amplifier from the vehicle.

1. Install the radio amplifier to the vehicle.
2. Install the radio amplifier connectors to the radio amplifier.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the radio amplifier fasteners.

Tighten
Tighten the fasteners to 9 N·m (80 lb in).




4. Install the bay board (1).
5. Install the bay board fasteners (2).

Tighten
Tighten the bay board fasteners (2) to 9 N·m(80 lb in).

6. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
7. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.