Removal Procedure
- Remove the door trim panel. Refer to
Front Side Door Trim Panel Replacement
in Doors.
- Disconnect the electrical connector.
- Note the orientation of the speaker electrical connector.
- Remove the 4 fasteners retaining the speaker to the door.
- Remove the speaker from the door.
Installation Procedure
- Install the speaker into the door,
with the electrical connector oriented as noted during removal.
Notice: Refer to Fastener Notice in the Preface section.
- Install the four fasteners.
Tighten
Tighten the 4 speaker fasteners to 2.5 N·m (22 lb in).
Important: If the vehicle is equipped with door-mounted tweeter speakers, ensure
that the proper harness connector is connected to the proper speaker.
- Connect the electrical connector to the speaker.
- Install the door trim panel. Refer to
Front Side Door Trim Panel Replacement
in Doors.