Removal Procedure
- Remove the overhead console. Refer to
Roof Console Replacement
in Interior Trim.
- Remove the garage door opener from the overhead console. Refer
to
Garage Door Opener Replacement
in Garage Door Opener.
- Remove the screws (1) securing the garage door opener carrier (2)
to the overhead console.
- Carefully rotate the garage door opener
carrier (1) to the rear of the console.
- Remove the screws (2) from the microphone.
- Remove the noise cancellation microphone (3) from the
overhead console.
Installation Procedure
- Install the noise cancellation microphone (3)
to the overhead console.
Notice: Refer to Fastener Notice in the Preface section.
- Install the microphone screws (2).
Tighten
Tighten the screws to 1.5N·m (14 lb in).
- Rotate the garage door opener carrier (1) into position
over the noise cancellation microphone.
- Install the garage door opener carrier
screws (1).
Tighten
Tighten the screws to 1.5N·m (14 lb in).
- Install the garage door opener to the overhead console. Refer
to
Garage Door Opener Replacement
in Garage Door Opener.
- Install the overhead console. Refer to
Roof Console Replacement
in
Interior Trim.