Removal Procedure
- Remove rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Disconnect the GPS antenna wire harness from the retaining clips
on the rear shelf trim panel.
- Remove the pushpins (1) retaining the GPS antenna module (2)
to the rear shelf trim panel by pulling out on the center of pushpin and
then pulling out the entire pushpin assembly.
- Remove the GPS antenna
module (2) assembly from the rear shelf trim panel.
Installation Procedure
- Install the GPS antenna module (2) to the rear shelf trim
panel.
- Install the pushpins (1) in order to retain the antenna
module to the rear shelf trim panel.
Push the center of the pin
down in order to lock the pins (1) in place.
- Install the GPS antenna
wiring harness to the rear shelf trim panel in order to retain the wiring
harness to the rear shelf trim panel.
- Install the rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.