GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 Seville 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T80-E 🢒 Automatic Transmission Mount Bracket Replacement - Left Side

Removal Procedure

    Object Number: 521892 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle In General Information.
  2. Support the powertrain assembly with a suitable jack.
  3. Remove the nut (1) securing the transmission mount to the transmission mount bracket.

    4. Object Number: 154970 Size: SH
  4. Lower the jack allowing the engine to lower slightly.
  5. Remove the transmission mount bracket mounting bolts (3) and nut (2).
  6. Remove the transmission mount bracket (1).

Installation Procedure

    Object Number: 154970 Size: SH
  1. Install the transmission mount bracket (1) to the transmission.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the transmission mount bracket mounting bolts (3) and nut (2).

    3. Tighten
    Tighten the bolts and nut to 50 N·m (37 lb ft).

  3. Raise the engine and transmission assembly into position.

    4. Object Number: 521892 Size: SH
  4. Install the nut (1) to the mount and mount bracket.

    5. Tighten
    Tighten the mount nut to 75 N·m (55 lb ft).

  5. Remove the engine assembly support jack.
  6. Lower the vehicle.