For 1990-2009 cars only
Removal Procedure
- Disable the SIR System. Refer to SIR Disabling and Enabling or SIR Disabling and Enabling in SIR.
- Move the seat to the full forward position.
- Remove the seat track fastener adjuster covers.
- Remove the seat track fasteners.
- Move the seat to the full rearward position.
- Remove the front seat storage tray. Refer to Front Seat Storage Tray Replacement .
- Recline the seat back fully rearward.
- Tilt the seat forward and disengage the front mounting points from the floor.
- Disconnect the electrical connectors.
- With the aid from an assistant, remove the seat from the vehicle.
Caution: Refer to SIR Caution in the Preface section.
Notice: Do NOT tilt the front seat forward because this will damage the seat storage tray.
Installation Procedure
- With the aid from an assistant, install the seat into the vehicle
- Engage the front seat tracks into the slots in the floor pan.
- With seat tilted forward, connect the electrical connectors.
- Lower the rear of the seat and tighten the outer anchor bolt first, then the inner anchor bolt last.
- Install the inner seat track adjuster trim cover.
- Move the seat to the full rearward and upward position.
- Install the front seat storage tray. Refer to Front Seat Storage Tray Replacement
- Enable the SIR System. Refer to SIR Disabling and Enabling or SIR Disabling and Enabling in SIR.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the seat anchor bolts to 41 N·m (30 lb ft).
