GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 Seville 🢒 General Information 🢒 General Information 🢒 Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side

Removal Procedure
  1. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 755974 Size: SH
  2. Remove the duct mounting screw (2).
  3. Remove the adapter duct mounting screw (1).

    4. Object Number: 755977 Size: SH
  4. Remove the duct mounting screw (1).
  5. Turn the right side temperature sensor ¼ of a turn in order to remove the sensor from the duct.

    6. Object Number: 755816 Size: SH
  6. Remove the duct.

Installation Procedure

    Object Number: 755811 Size: SH
  1. Install the duct.

    2. Object Number: 755974 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the duct screws (1, 2).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 755977 Size: SH
  3. Install the duct screw (1).

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Turn the right side air temperature sensor ¼ of a turn in order to install the sensor into the duct.
  5. Install the instrument panel. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gages and Console.