Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This table checks for all functions of the RKE transmitters being inoperative. | ||||
1 | Were you sent here from the Remote Keyless Entry System Check? | -- | ||
2 | Resynchronize the transmitters. Go to Transmitter Synchronization . Do the transmitters function? | -- | ||
3 | Check IGN SW fuse in the rear junction block for an open. Is the fuse open? | -- | ||
4 | Disconnect the RKE module. Check for voltage from the RKE module at terminal A to ground. Is the voltage within the specified range? | 10-15 V | ||
5 | Check for ground at terminal D ( CKT 1351 BLK/WHT) at the RKE module. Is there ground present? | -- | ||
6 | Check for open or short to ground in CKT 540 (ORN). Is the repair complete? | -- | -- | |
7 | Check for an open in CKT 1351 (BLK/WHT) from RKE module terminal D to ground. Is the repair complete? | -- | -- | |
8 | Replace the RKE module. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- | |
9 | Replace the IGN SW fuse. Is the repair complete? | -- | -- | |
