GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 XLR 🢒 Engine 🢒 Engine Mechanical - 4.6L (LH2) 🢒 Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure
  1. Turn the ignition switch to the OFF position.

    2. Object Number: 1274762 Size: SH
  2. Loosen the two insulator nuts located on each side of the EBCM.
  3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    4. Object Number: 1274761 Size: SH
  4. Remove the two bracket bolts.
  5. Remove the brake pressure modulator valve (BPMV) bracket.

Installation Procedure
  1. Position the BPMV bracket in the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1274761 Size: SH
  2. Install the two BPMV bracket bolts.

    3. Tighten
    Tighten the bolt to 27 N·m (20 lb ft).

  3. Lower the vehicle.

    4. Object Number: 1274762 Size: SH
  4. Place the EBCM/BPMV in the bracket.
  5. Tighten the two insulator nuts.

    6. Tighten
    Tighten the nuts to 12 N·m (106 lb in).