Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Controls Pedal Assembly Nut | 10 N·m | 89 lb in |
Camshaft Position Actuator Solenoid Bolts | 8 N·m | 71 lb in |
Camshaft Position (CMP) Sensor Retaining Bolt | 10 N·m | 89 lb in |
Crankshaft Position (CKP) Sensors Retaining Bolt | 10 N·m | 89 lb in |
Engine Control Module (ECM) Bolts | 3 N·m | 27 lb in |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
EVAP Canister Bracket Retainer Nut | 6 N·m | 53 lb in |
EVAP Canister Purge Valve Bolt | 12 N·m | 106 lb in |
EVAP Pipe Retainer Nut | 6 N·m | 53 lb in |
EVAP Vent Valve Bolt | 6 N·m | 53 lb in |
Evaporative Emission (EVAP) Canister | 6 N·m | 53 lb in |
Fuel Filler Pipe Bolts | 3.5 N·m | 31 lb in |
Fuel Filler Pipe Clamp | 3.5 N·m | 31 lb in |
Fuel Injector Sight Shield Bracket Nuts | 10 N·m | 89 lb in |
Fuel Pump Speed Control Module Nut | 12 N·m | 106 lb in |
Fuel Rail Assembly Studs | 9 N·m | 80 lb in |
Fuel Rail Bracket Retainer Nut | 10 N·m | 89 lb in |
Fuel Tank Filler Pipe Ground Wire Attaching Bolt | 4.0 N·m | 35 lb in |
Fuel Tank Retaining Strap Bolts | 25 N·m | 18 lb ft |
Heated Oxygen Sensor (HO2S) | 42 N·m | 31 lb ft |
Ignition Coil Assembly Bolts | 10 N·m | 89 lb in |
Ignition Coil Bolts | 10 N·m | 89 lb in |
Ignition Control Module Retaining Screws | 0.8 N·m | 7 lb in |
Intake Air Duct Clamps | 3 N·m | 27 lb in |
Knock Sensor Bolt (KS) | 20 N·m | 15 lb ft |
Manifold Absolute Pressure (MAP) Sensor Bolt | 12 N·m | 106 lb in |
Spark Plugs | 20 N·m | 15 lb ft |
Throttle Actuator Control (TAC) Bolts | 2.0 N·m | 17 lb in |
Throttle Body Attaching Bolts | 10 N·m | 89 lb in |