Application | Specification | |
|---|---|---|
Metric | English | |
Bearing Housing Assembly-to-Coupling Bolts | 70 N·m | 52 lb ft |
Coupling-to-Propeller Shaft Bolts | 70 N·m | 52 lb ft |
Driveline Tunnel Closeout Panel Bolts | 10 N·m | 89 lb in |
Electronic Brake and Traction Control Module (EBTCM) LH Mounting Bracket Mounting Bolts | 50 N·m | 37 lb ft |
Flex Plate Spindle Nut | 90 N·m | 66 lb ft |
Flex Plate-to-Flex Plate Spindle Bolts | 50 N·m | 37 lb ft |
Input Shaft Bearing Positioning Bolts | 35 N·m | 26 lb ft |
Input Shaft-to-Coupling Bolts | 70 N·m | 52 lb ft |
Negative Battery Cable Bolt | 15 N·m | 11 lb ft |
Propeller Shaft Balance Specification @ 3,500 RPM | 6.0 G-CM Maximum | -- |
Propeller Shaft Hub Clamp Bolt | 125 N·m | 93 lb ft |
Rear Exhaust Hanger Mounting Bolts | 50 N·m | 37 lb ft |
Rear Shock Absorber Lower Mounting Bolt | 220 N·m | 162 lb ft |
Rear Suspension Crossmember Mounting Nuts | 110 N·m | 81 lb ft |
Shift Control Mounting Bolts | 30 N·m | 22 lb ft |
Transaxle Mount Bracket-to-Differential Bolts | 50 N·m | 37 lb ft |
Transaxle Mount-to-Rear Suspension Crossmember Nuts | 50 N·m | 37 lb ft |
Transmission Oil Cooler Rear Pipe Front Fittings-to-Junction Fittings at Engine Flywheel Housing | 27 N·m | 20 lb ft |
Transmission Oil Cooler Rear Pipe Rear Fittings-to-Transmission Fittings | 40 N·m | 30 lb ft |
Transmission Oil Cooler Rear Pipe Retaining Clamp Bolts | 12 N·m | 106 lb in |
Transmission Shift Control Cable Bracket Retaining Nuts | 20 N·m | 15 lb ft |
Transmission Shift Rod Clamp Bolt | 30 N·m | 22 lb ft |
Transmission-to-Driveline Support Assembly Bolts/Studs | 50 N·m | 37 lb ft |
Transmission Wiring Harness-to-LH Transmission Case Retaining Bolt | 2.5 N·m | 22 lb in |
Tuned Absorber M 10 Bolts | 50 N·m | 37 lb ft |
