GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 XLR 🢒 Driveline/Axle 🢒 Rear Drive Axle 🢒 Ring Gear and Differential Housing Disassemble

Tools Required

    • J 42159 Getrag Axle Right Side Differential Bearing Remover
    • J 42162 Getrag Axle Side Gear Compressor
    • J 42173 Getrag Axle Ring Gear Holder

    Object Number: 1041927 Size: SH
  1. Position the differential case assembly onto the J 42173 .

    2. Object Number: 1041930 Size: SH
  2. Remove the ring gear bolts and ring gear.
  3. Using a punch and a hammer, drive out the ring gear.
  4. Discard the ring gear bolts.

    5. Object Number: 58596 Size: SH
  5. Install the J 42159 onto the right differential side bearing.
  6. Using the J 42159 , J 42162 , and a hydraulic press, remove the right side bearing from the differential.

    7. Object Number: 58600 Size: SH
  7. Remove the differential case bolts.
  8. Separate the case halves, right and left.

    9. Object Number: 58602 Size: SH
  9. Remove the intermediate shaft and left gear from the left case.

    10. Object Number: 58605 Size: SH

    Important: Friction discs and separator plates develop specific wear patterns. During disc and plate removal, the components must be retained in the specific order in which they were removed.

  10. Remove the left clutch pack from the left case.
    11. • Remove the separator plates (1).
    • Remove the friction discs (2).
    • Remove the friction disc (thick) (3).
    • Remove the bellville washer (4).
  11. Tag the clutch pack to indicate the position of the components.

    12. Object Number: 63463 Size: SH
  12. Install the J 42159 onto the left differential side bearing.
  13. Using the J 42159 , J 42162 , and a hydraulic press, remove the left side bearing from the differential.

    14. Object Number: 63464 Size: SH
  14. Remove the C-clip from the left intermediate shaft.

    15. Object Number: 58607 Size: SH
  15. Remove the gear from the left intermediate shaft.

    16. Object Number: 58612 Size: SH
  16. Using the J 42162 and a hydraulic press, compress the bellville washer and clutch pack in order to remove the cross pin from the right differential case.

    17. Object Number: 58616 Size: SH
  17. Remove the right side gears (1), side gear washers (2), and output shaft and gear (3) from the right differential case.

    18. Object Number: 58622 Size: SH

    Important: Friction discs and separator plates develop specific wear patterns. During disc and plate removal, the components must be retained in the specific order in which they were removed.

  18. Remove the right clutch pack from the right case.
    19. • Remove the bellville washer (1).
    • Remove the friction disc (thick) (2).
    • Remove the friction discs (3).
    • Remove the separator plates (4).
  19. Tag the clutch pack to indicate the position of the components.