Radio Volume Compensator Interior Noise Microphone Replacement for Cadillac XLR 2004

1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Interior Trim.



2. Remove the 2 retaining screws from the microphone.
3. Remove the microphone from the knee bolster trim panel.

1. Install the microphone to the knee bolster trim panel.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the 2 retaining screws to the microphone.

Tighten
Tighten the screws to 2.5 N·m (22 lb in).

3. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Interior Trim.