Removal Procedure
- Remove the windshield garnish molding. Refer to
Windshield Garnish Molding Replacement
.
- Using a small flat-bladed tool, release the Onstar® microphone from the trim bezel retainers.
- Remove the Onstar® microphone wire harness from the windshield header.
- Disconnect the wire harness lead.
Installation Procedure
- Connect the wire harness lead to the Onstar® microphone.
- Install the wire harness to the windshield header.
- Align the microphone to the trim bezel. Push to engage the retainers.
- Install the windshield garnish molding. Refer to
Windshield Garnish Molding Replacement
.